PE200x350 Jaw Crusher is mainly used to crush kinds of mining stones and rocks with compressive strength less than 320Mpa, it is widely used in mining, buidling materials, chemical industry, metallurgy and so on.
Working Principle:
The motor transmits power through belt, drives the moving jaw do periodic motion to the fixed jaw surround the eccentric shaft. The angle between toggle plate and moving jaw increases when moving jaw moves up. So the moving jaw closes to the fixed jaw. The stuff will be crushed in this process. The angle of Jaw Crusher between toggle plate and moving jaw decreases when moving jaw moves down, the moving jaw of Jaw Crusher moves away from fixed jaw by the pulling of rod and spring, the products after crushing will be discharged from the outlet of Jaw Crusher.
Characteristics:
High ratio of crushing, homogeneous final grain size, simple structure, reliable working condition, easy maintenance, low operating cost.
Technical Data：
|
Type
|
Inlet size (mm)
|
Max Feeding Size
(mm)
|
Discharge Size(mm)
|
Power
(KW)
|
Capacity
(T/H)
|
|
PE150x250
|
150x250
|
125
|
10-40
|
5.5-7.5
|
1-5
|
|
PE200x350
|
200x350
|
125
|
15-40
|
7.5-11
|
5-16
|
|
PE250x400
|
250x400
|
210
|
20-60
|
15-18.5
|
5-20
|
Note: All technical data is subject to change without prior notice. |
;)
